EGR states that the EGR RollTrac is weather resistant. The EGR RollTrac should not leak through the top slat surface, the side rails, canister, or the drainage tube system. However, as we do not conduct each and every fitment ourselves (unit assembly and placement onto the vehicle), we cannot guarantee the integrity of the fitment, and therefore will not guarantee the product will be ‘waterproof’. Perimeter sealing and overall gap filling is the responsibility of the fitter you have hired to complete the fitment. Keep in mind, your existing tub has holes with the front wall, floor, and a 10mm gapping around the sides and bottom of the tailgate also.

EGR warrants that the EGR RollTrac will be free from defects in material and workmanship for a period of three (3) years from the retail date of purchase. Warranty must be claimed with an original sales receipt showing proof of purchase. It is recommended that warranty claims be lodged via a place of purchase/fitment.

Please note that a your warranty is void if not installed by a certified installer.

Whilst the EGR RollTrac fits the vehicle using a clamp system, there is drilling required to fit the tailgate stop rail, and the drainage tubes.

For the surface, a standard car wash works just fine. For clearing debris, leaves, or other organic material that has fallen onto the EGR RollTrac and collected in the canister, open the access ports of the canister and remove any items sitting idle in the bottom

The UV-stable powder coat finish of the EGR RollTrac has been tested in the harshest conditions and complies with all leading motor car company requirements. You should not expect any discolouring of your EGR RollTrac.

All major racking brands will work on the EGR RollTrac. Yakima, Pro Rack, Rhino, Thule, Rola, should all be able to adapt and integrate into our side rail channeling. Other accessories include EGR’s own 150kg Cross Bar Kit, OEM Sports Bar Integration Kits and Dust Defence Kits, as well as extra LED lighting.

EGR has a range of service kits for interchangeable parts on EGR RollTrac.

The Electric EGR RollTrac is equipped with a manual override function and key lock. Using the supplied key, you will be able to unlock the Electric EGR RollTrac and operate it manually in the event of a battery or other electrical failure.

The EGR RollTrac aluminium slats will not allow water to penetrate between them, and any water that falls onto the broad surface area, is dispersed off to the side railing. The water flows through a channel in the side railing, either to the front canister or rear corners, then exits through large drainage tubes.

EGR RollTrac has a top load capacity of between 200 – 330lb depending on your vehicle manufacturer. Please review the yellow warning label on your EGR RollTrac for the nominated capacity for your vehicle. Also please note, your load capacity is also affected and determined by the brand of racking you choose to accessories your EGR RollTrac with. Different Rack manufacturers have different ratings for their racking components. If in doubt, review your warning label located on the canister of the EGR RollTrac unit.

Yes, with some modification required. Precise trimming requirements are thoroughly outlined in the fitting instructions for each product.

Recent University studies have demonstrated that installing a flat cover onto the bed of your pick up can improve your fuel consumption by 7-10%. Installing accessories onto the EGR RollTrac such as bike carriers and loading rails may reduce the amount of benefit.

Electric units weigh approx 110lbs (Boxed weight is 143lb)

In the instance of lodging a warranty claim, please return to the place of purchase or fitment, and lodge with them directly, as essentially, they sold you the product.

• They will then claim on your behalf, to EGR.
• EGR will request the following (perhaps provide it to your place of purchase to save processing time)
• Product & Part Number
• Description of the warranty issue
• Copy of original receipt
• Images of the issue and serial number label

We recommend that your EGR RollTrac is installed by an EGR-accredited fitter. Correctly fitting the EGR RollTrac can be an extensive procedure for the un-trained, and access to specialised tools and technical know-how improves the overall result. Poor fitment can reduce the quality of the product you have purchased.

Please note that your warranty is void if not installed by a certified installer.

The EGR RollTrac integrates with your vehicle’s central locking. When the tailgate is closed and the EGR RollTrac is locked.